阿摩線上測驗
登入
首頁
> 最新資料
最新資料
瀏覽最新的試卷、試題和詳解,掌握最新考試資訊
最新科目
技檢◆鋼筋-乙級
技檢◆鋼筋-甲級
高考二級◆食品衛生與安全研究
最新試卷
114年 - 114 國立高雄大學_研究所碩士班招生考試試題_生命科學:生物化學#137690(0題)
114年 - 114 新北市新北高中學年度上學期第二次段考數學A#137677(22題)
114年 - 114 四技二專統測_設計群_專業科目(一):色彩原理、造形原理、 設計概論#137674(50題)
114年 - 114-1 國立基隆高級中學教師甄選試題 :美術科#137671(46題)
114年 - 114-3 企業內部控制:企業內部控制理論與實務(含相關法規)#137669(80題)
114年 - 114 四技二專統測_機械群_專業科目(一) :機件原理、機械力學#137655(40題)
114年 - 114 台灣糖業股份有限公司_新進工員甄試_機械:B.機械電學#137651(46題)
114年 - [無官方正解]114 國立臺灣大學_ 碩士班招生考試試題:應用病理學#137638(50題)
114年 - 114 台灣糖業股份有限公司_新進工員甄試_電機:電工機械#137618(45題)
114年 - 114 台灣糖業股份有限公司_新進工員甄試試題_土木:施工規劃及控制概要#137617(47題)
最新試題
20. A uniform plate of mass M is placed on two fast-rotating identical wheels of radius r. The coefficients of kinetic friction between the plate and both wheels are μ, the distance between the centers of the two wheels is , the wheel on the right (left) rotates counterclockwise (clockwise) with angular speed ω (see Fig. 5), and the gravitational acceleration is denoted g. If the mass center of the plate is displaced by d from the center of the two wheels, what is the frequency the plate oscillates with? (Assuming the plate is so heavy that it always stays on the wheels.)(A) ω (B) (C) (D)
19. As shown in Fig. 4, an m1 = 1.0 kg block is placed on top of an m2 = 8.0 kg block, which lies on a frictionless surface. The coefficient of kinetic friction between the two blocks is 0.20; they are connected via a pulley and a string. A hanging block of mass m3 = 6.0 kg is connected to the mass m2 block via another pulley and string. Both strings are massless and the pulleys are frictionless. What is the acceleration magnitude of the blocks? (Gravitational acceleration g =9.8 m/s²) m1 m2 M3 Figure 4. A system composed of three blocks, strings, and pulleys. (A) 3.7 m/s² (B) 2.7 m/s² (C) 9.7 m/s2 (D) 8.0 m/s²
18. The effective resistance from a to b in Fig.3 is 4.0 2.What is the resistance of individual resistors in the circuit? (The resistances of all the individual resistors are the same.) (A) 4.02(B)2.0 Ω (C) 8.0 Ω (D) 0.8 2
最新申論題
(b) Use curved arrows to describe the detailed mechanism of these two steps. (8 points)
(a) Please draw two key resonance structures of diazomethane. (8 points)
2.Electrophilic aromatic substitution reactions of pyridine normally occur at C3. Draw the carbocation intermediates resulting from reaction of an electrophile at C2, C3, and C4, and explain the observed result. (14 points)
最新課程
王立杰-幼稚教育考試精粹
講師:
【站僕】摩檸Morning.
陳萱-公民
講師:
【站僕】摩檸Morning.
陳真、黃靖-行政學精典
講師:
【站僕】摩檸Morning.
最新主題筆記
民法 編債 第 253 條
課程:
民法 編債
章節:
第 一 章 通則 第 三 節 債之效力
描述:
前三條之規定,於約定違約時應為金錢以外之給付者準用之。
民法 編債 第 254 條
課程:
民法 編債
章節:
第 一 章 通則 第 三 節 債之效力
描述:
契約當事人之一方遲延給付者,他方當事人得定相當期限催告其履行,如於期限內不履行時,得解除其契約。
民法 編債 第 255 條
課程:
民法 編債
章節:
第 一 章 通則 第 三 節 債之效力
描述:
依契約之性質或當事人之意思表示,非於一定時期為給付不能達其契約之目的,而契約當事人之一方不按照時期給...
最新討論
8 西元 1927 年,臺灣教育會創辦第一屆臺灣美術展覽會(簡稱臺展),有 3 位臺籍東洋畫家的作品入選, 這 3 人被稱為「臺展三少年」。請問下列何者不是「臺展三少年」? (A)陳進 (B)李梅樹 (C)林玉山 (D)郭雪湖
60. The RNA-guided Cas9 nuclease and clustered regularly interspaced short palindromic repeats (CRISPR) enable efficient genome engineering in eukaryotic cells. Which of the following statements about this system is correct? a) originally belong to the microbial adaptive immune system, b) RNA- guided Cas9 nuclease cleaves genetic elements, c) engages DNA repair system, d) a useful tool for specific gene knockdown, e) insertion or deletion usually leads to frameshift mutations. (A) abd (B) abcd (C) bde (D) abce (E) all
62. Which of the following mechanism is NOT how bacteria defend against phage infection? (A) bacteria with mutant receptors unrecognizable to phages (B) restriction enzymes degrade exogenous genetic elements (C) type II topoisomerases facilitate conformational changes of DNA during replication and transcription (D) CRISPR-Cas system (E) none
20 有關訴願合法要件之敘述,下列何者正確?(A)甲向主管機關 A 申請核發建造執照,A 遲未核發,甲提起訴願。訴願審議中,A 核發建造執照,此時應作成訴願不受理之決定 (B)未成年人未由法定代理人代為提起訴願,應逕為不受理決定 (C)人民不服課稅處分,應先提起復查,之後方得提起訴願 (D)行政機關未履行行政契約,人民權利受到損害,得提起課予義務訴願
21 下列何者非屬替代訴願之程序?(A)政府採購法之申訴程序 (B)公務人員保障法之復審程序 (C)稅捐稽徵法之復查程序 (D)會計師法之懲戒覆審程序
23. 二行程主機典型的滑油系統,經外部管路及內部通道將滑油送入機器各部件潤滑,下列何者為錯誤? (A) 主軸承、曲柄栓軸承 (B) 導靴、導板 (C) 凸輪軸軸承、傳動齒輪 (D) 推力軸承、轉車機