阿摩線上測驗
登入
首頁
>
1.固力學及熱力學;2.流體力學;3.金屬材料
>
104年 - 中鋼104師級機械#23202
> 試題詳解
1 請計算 A、B 兩處的作用力,當α角為 30∘時?
(A) A=165N; B=165N
(B) A=430N; B=275N
(C) A=219N; B=141.5N
(D)A=275N; B=430N。
答案:
登入後查看
統計:
A(1), B(6), C(13), D(2), E(0) #869840
詳解 (共 1 筆)
harvey055156
B1 · 2019/03/20
#3254457
By=Bcos30o(假設方向向下)Bx...
(共 118 字,隱藏中)
前往觀看
12
0
相關試題
複選題49、 在下列金屬中,晶體結構之配位數(coordination number)為 12 者,是: (A) Ag (B) Mo (C) α -Ti (D) Cr
#869888
複選題50、 下列合金之主要成分,何者正確? (A)青銅:鉛銅 (B)黃銅:鋅銅 (C)巴氏合金:錫銻銅 (D)蒙納合金:鎳銅。
#869889
複選題51、 焠火硬化的鋼材經回火後,可以: (A)降低內應力 (B)消除偏析(segregation) (C)增加硬度 (D)改善韌性。
#869890
複選題52、 At which angle of a crystal direction to the applied load may a slip along it not take place? (A) 30° (B) 45° (C) 60° (D) 90°
#869891
2、 What mechanism can cause the entropy of a control mass to decrease? (A) Work done on the system (B) Transfer heat to the system (C) Transfer heat from the system (D) Irreversible process
#869841
3、 Using the parallel-axis theorem, determine the product of inertia of the area shown with respect to the centroidal x and y axes ( Ixy)? (A)138.24×103 mm4 (B) 69.12×106 mm4 (C) 138.24×106 mm4 (D) 69.12×103 mm4。
#869842
4、 如圖 4 之懸臂樑結構,則在 C 點處所受之剪力為何? (A)1080 N, (B)980 N, (C)540 N, (D) 640 N。
#869843
5、 Which of the following failure theories is the most conservative? (A) Maximum normal stress theory (B) Maximum shear stress theory (C) Maximum distortion energy theory (D) Maximum normal strain theory
#869844
6、 針對理想的 Rankine Cycle(如圖 6)而言,下列敘述何者正確? (A)2-3 為等容過程 (B)3-4 是等壓過程 (C)渦輪作正功 (D)幫浦作正功。
#869845
7、 一簡支樑受集中力作用如下圖所示,其最大撓曲點在下列何處? (A) 0 < x < L/3 (B) x = L/3 (C) L/3 < x < 2L/5 (D) 2L/5 < x < L
#869846
相關試卷
111年 - 111 中國鋼鐵股份有限公司_新進人員甄試試題_師級-機械:1.固力學及熱力學 2.流體力學 3.金屬材料與機械製造#111767
2022 年 · #111767
110年 - 110 中國鋼鐵股份有限公司_新進人員甄試_師級_機械:1.固力學及熱力學 2.流體力學 3.金屬材料與機械製造#97720
2021 年 · #97720
108年 - 108 中國鋼鐵股份有限公司_新進人員甄試_師級_機械:1.固力學及熱力學 2.流體力學 3.金屬材料與機械製造#75958
2019 年 · #75958
106年 - 106年中鋼新進人員師級-1.固力學及熱力學 2.流體力學 3.金屬材料#60089
2017 年 · #60089
104年 - 中鋼104師級機械#23381
2015 年 · #23381
104年 - 中鋼104師級機械#23202
2015 年 · #23202