阿摩線上測驗
登入
首頁
>
輪機工程(概要)(包括推進裝置、輔機與輪機英文)
>
112年 - 112-4 航海人員測驗_一等管輪:輪機工程(包括推進裝置、輔機與輪機英文)#117504
> 試題詳解
2. 當離心泵於預定額定工況下運轉,突關小排出閥後,不會發生下列何種現象?
(A) 流量減小
(B) 工作揚程提高
(C) 允許吸入真空度減小
(D) 效率下降
答案:
登入後查看
統計:
A(49), B(258), C(504), D(67), E(0) #3170966
詳解 (共 1 筆)
高海凃伯伯愛你
B1 · 2024/02/20
#6030832
離心式泵的特性 1.泵的最大效率不是在...
(共 174 字,隱藏中)
前往觀看
21
0
私人筆記 (共 1 筆)
已考過河特有疑問可加好友詢問
2024/01/08
私人筆記#5693905
未解鎖
突關小排出閥後 (A) 流量減小-...
(共 128 字,隱藏中)
前往觀看
10
0
其他試題
38. 通電螺線管之磁場可由何種定則決定? (A) 安培右手定則 (B) 螺線管定則 (C) 佛萊銘右手定則 (D) 法拉第定則
#3170962
39. 若在泵的原動馬達停止運轉之前,即先行關閉出口閥,則以下何種泵最不容易受損? (A) 離心式 (B) 齒輪式 (C) 柱塞式 (D) 往復式
#3170963
40. 軸系中心線的偏差度反映的是何者的程度? (A) 垂直平面和水平平面上之彎曲 (B) 垂直平面和水平平面上之扭轉 (C) 任意兩垂直平面上之彎曲 (D) 任意兩垂直平面上之扭轉
#3170964
1. 離心式泵之轉軸一般以下列何種材質為主? (A) 不銹鋼 (B) 銅鋁合金 (C) 鋁青銅 (D) 鑄鐵
#3170965
3. 若要改善離心式泵自行加注引水,下列何者不是常用之作法? (A) 出口閥前加裝噴射泵 (B) 使泵充滿欲抽送之液體 (C) 將泵置於抽送液體液面下方 (D) 吸口處加裝止回閥
#3170967
4. The volume above piston in a cylinder when the piston is positioned at the _____ refers to the clearance volume. (A) BDC (B) TDC (C) above scavenging port (D) below scavenging port
#3170968
5. For diesel engines, fuel is injected into the cylinders of a diesel engine toward the ______________ . (A) beginning of the compression stroke (B) end of compression stroke (C) charging process (D) exhaust process
#3170969
6. 一般螺葉於轂部對推進器軸中心線會有多少傾斜角度? (A) 4~9∘ (B) 10~15∘ (C) 20~25∘ (D) 30~35∘
#3170970
7. An adjustment screw permits the valve to be set up for condensate release at a specific temperature. Clearly in an application where the pressure varies there could be a board band of operation in which the trap would be ether waterlogged or passing steam. What type of operated traps is above description? (A) Thermodynamic trap (B) Mechanical trap (C) Thermostatic trap (D) Vacuum trap
#3170971
8. The working fluid employed as the heat absorber in any refrigerating process is called as __________. (A) heating (B) recycle (C) refrigerant (D) renew
#3170972