阿摩線上測驗
登入
首頁
>
輪機工程(概要)(包括推進裝置、輔機與輪機英文)
>
105年 - 105-2 交通部航海人員測驗_一等管輪:輪機工程(包括推進裝置、輔機與輪機英文)#53652
> 試題詳解
20. Compression was obtained within all cylinders as the engine's ________ was rotated.
(A) turbo-charger
(B) crankshaft
(C) lubricating pump
(D) balancer
答案:
登入後查看
統計:
A(176), B(536), C(94), D(19), E(0) #1359048
詳解 (共 1 筆)
Wind
B1 · 2022/01/14
#5304650
20.當發動機的____旋轉時,對所有氣...
(共 62 字,隱藏中)
前往觀看
11
0
相關試題
1. 下列何者為單級離心泵閉式葉輪後蓋板開圓孔的目的? (A) 調節壓頭 (B) 平衡徑向力 (C) 使葉輪軸向力平衡 (D) 減輕葉輪重量
#1359029
2. 下列何者與離心泵的轉速比無關? (A) 泵的轉速 (B) 泵的壓頭 (C) 泵的流量 (D) 葉輪的尺寸
#1359030
3. __________ is the gas exchange process in which the charge air passes over the piston crown and rises to form a loop within the cylinder, expelling exhaust gases through exhaust ports cut in the same side of the liner above the scavenge ports. (A) Loop flow scavenging (B) Cross flow scavenging (C) Uniflow scavenging (D) Standard flow scavenging
#1359031
4. What equipment is used to relieve excess pressure. It only fitted on top of boiler and prevents pressure to excess in boiler? (A) Quick closing valve (B) Relief valve (C) Globe valve (D) Safety valve
#1359032
5. 下列對淡水機防蝕設備的敘述,何者不正確? (A) 使用陰極防蝕法 (B) 熱交換器採用鈦金屬材料 (C) 泵外殼採鋁銅合金 (D) 內部塗裝多元樹脂
#1359033
6. 一般造水裝置中,水垢主要出現在何處? (A) 蒸發室海水側 (B) 蒸發室加熱水側 (C) 冷凝器冷凝側 (D) 冷凝器冷卻水側
#1359034
7. 下列何因素會導致淡水機真空抽射器的抽氣能力下降? (A) 抽射器工作水壓不足 (B) 冷凝器冷卻水溫度升高 (C) 加熱介質流量過大 (D) 鹽水濃度太高
#1359035
8. In case of a failure of the engine _________ occurred during maneuvering , the main engine control mode can be changed to an emergency control stand at local. (A) monitoring system (B) fuel oil system (C) lube oil system (D) control system
#1359036
9. By pouring oil to tanks one by one, we can prevent overflowing and the loading equipment from _________ by extra-ordinary pressure. (A) damage (B) having damage (C) to be damaged (D) being damaged
#1359037
10. 殼管式滑油冷卻器之構造中,水室是由管板與下列何者構成? (A) 閥座 (B) 外接管 (C) 熱交換管 (D) 端蓋
#1359038
相關試卷
114年 - 114-3 交通部航港局_船員岸上晉升適任性評估筆試測驗_三等管輪(新):輪機概論#133730
2025 年 · #133730
114年 - 114-4 航海人員測驗_一等管輪:輪機工程(包括推進裝置、輔機與輪機英文 )#133526
2025 年 · #133526
114年 - 114-3 航海人員測驗_一等管輪:輪機工程(包括推進裝置、輔機與輪機英文 )概要#130591
2025 年 · #130591
114年 - 114-3 航海人員測驗_二等管輪:輪機工程(包括推進裝置、輔機與輪機英文 )概要#130416
2025 年 · #130416
114年 - 114 海岸巡防特種考試_四等_海洋巡護科輪機組:輪機工程概要(包括推進裝置概要、輔機概要與輪機英文)#130200
2025 年 · #130200
114年 - 114 海岸巡防特種考試_三等_海洋巡護科輪機組:輪機工程(包括推進裝置、輔機與輪機英文)#130194
2025 年 · #130194
114年 - 114 海岸巡防特種考試_四等_海洋巡護科輪機組:輪機工程概要#129842
2025 年 · #129842
114年 - 114 海岸巡防特種考試_三等_海洋巡護科輪機組:輪機工程(包括推進裝置、輔機與輪機英文)#129839
2025 年 · #129839
114年 - [無官方正解]114-2 航海人員測驗_二等管輪:輪機工程(包括推進裝置、輔機與輪機英文)#128257
2025 年 · #128257
114年 - 114 一般警察特種考試_四等_水上警察人員輪機組:輪機工程概要(包括推進裝置、輔機與輪機英文)#127691
2025 年 · #127691