221.When riding a motorcycle, besides checking for fuel, which of the followingstatements is correct?
(A) No additional basic maintenance is needed.
(B)Basic maintenance is required to ensure the vehicle's condition.
(C) Only thetire tread depth needs to be checked.

222.If a motorcycle produces abnormal noises when braking, which of thefollowing statements regarding handling is correct? (A) If the noise occurs onlyin wet weather and the brakes function normally, it is considered normal andrequires no special action. (B) The motorcycle should be taken as soon aspossible to a certified shop for a professional technician to inspect the brakesystem, identify the cause of the abnormality, and perform necessary repairs.(C) You can check the brake pad thickness yourself, and if it has not worndown to the warning line, there is no safety concern.

223.Before riding a motorcycle, a safety inspection should be conducted.Regarding the inspection items, which of the following statements is correct?(A) Mainly check the brakes and tires; as long as the braking system isnormal, it is safe to ride. (B) Since the motorcycle passed safety inspectionbefore leaving the factory, only periodic maintenance requires a full check. (C)Check the lights, turn signals, brakes, tires, horn, and rearview mirrors,ensuring all systems function properly.

224.Regarding safety helmet precautions, which of the following statements isincorrect? (A) A helmet that has been subjected to impact can still be usednormally if the exterior shows no damage, without replacement. (B) The chinstrap length should not be too long or too short, leaving about one finger'swidth of space. (C) The buckle should be under the chin, leaving one finger'sspace, and the knob should be tightened.

225.When a motorcycle rider and passenger wear a safety helmet, regarding thefastening of the chin strap, which of the following statements is correct? (A)After fastening the strap, leave about one to two finger-widths of slack tobalance comfort and ventilation. (B) The helmet should be worn facing forwardand the chin strap securely fastened, ensuring the helmet fits snugly on thehead. (C) For short trips or low-speed riding, the strap only needs to be lightlyfastened and does not need to be tight.

226.Regarding the selection of a motorcycle safety helmet, which of the followingstatements is correct? (A) When choosing a helmet, comfort and ventilationshould be the primary considerations. (B) Select a helmet that bears thecommodity inspection mark from the Bureau of Standards, Metrology andInspection (BSMI) to ensure it meets safety standards. (C) Imported brandhelmets that pass international safety certifications have stricter protectiveperformance than domestic standards and can be safely chosen.

227.Regarding modification or alteration of motorcycle lights, which of thefollowing statements is correct? (A) Applying a transparent protective film tothe lights to prevent scratches, as long as it does not affect brightness, iscompliant. (B) Installing high-brightness bulbs that have passed inspection toimprove nighttime illumination is compliant. (C) Lights must not be painted,covered with tape, or fitted with additional covers, as this may affect visibilityand recognition.

228.Regarding regulations on modifying motorcycle exhaust pipes, which of thefollowing statements is correct? (A) Replacing with an exhaust pipe certifiedby the Environmental Protection Administration (EPA) and meeting emissionstandards complies with modification regulations. (B) Using the same modelOEM parts to replace the exhaust pipe position, without changingspecifications, complies with regulations. (C) The number and position ofexhaust pipes must not be changed, and the muffler or catalytic convertermust not be removed.

229.Before starting the motorcycle engine, which items should be checked? (A)Only the fuel level. (B) Only the engine oil level. (C) Both the engine oil andfuel levels.

230.When is the most accurate time to measure the engine oil level of amotorcycle? (A) Immediately after parking and turning off the engine. (B)When the motorcycle is tilted. (C) After the motorcycle has been stationary ona level surface for a period of time with the engine off.

231.Regarding motorcycle tire pressure, which of the following statements iscorrect? (A) The higher the tire pressure, the better. (B) Tire pressure shouldbe lower than the manufacturer's specification to increase grip. (C) Tirepressure should comply with the manufacturer's specifications, and treaddepth should be sufficient.

115年 - 機車駕照筆試_英文 751-806（2026/01 更新）#144939

115年 - 機車駕照筆試_英文 701-750（2026/01 更新）#144938

115年 - 機車駕照筆試_英文 651-700（2026/01 更新）#144937

115年 - 機車駕照筆試_英文 601-650（2026/01 更新）#144936

115年 - 機車駕照筆試_英文 551-600（2026/01 更新）#144935

115年 - 機車駕照筆試_英文 501-550（2026/01 更新）#144934

115年 - 機車駕照筆試_英文 451-500（2026/01 更新）#144933

115年 - 機車駕照筆試_英文 401-450（2026/01 更新）#144932

115年 - 機車駕照筆試_英文 351-400（2026/01 更新）#144931

115年 - 機車駕照筆試_英文 301-350（2026/01 更新）#144930