40 According to Regulations Governing Customs Clearance Procedures for Maritime Express Consignments, shipments with gross weight of more than  _______ kg packed in a single package is not allowed to be cleared through the Maritime Express Consignments; and containers loaded with maritime express consignments shall be unloaded and warehoused within  _______ working days.
(A) 60 kg and 2 working days
(B) 60 kg and 3 working days
(C) 70 kg and 3 working days
(D) 70 kg and 4 working days

36 European Union introduces an environmental policy instrument designed to support the EU climate ambitions of achieving a net reduction of greenhouse gas emissions of at least 55% by 2030 and of reaching climate neutrality by 2050. Which of the followings is this policy instrument? (A) The Carton Binder Adjustment Mechanism (CBAM) (B) The Carbon Binder Allocation Mechanism (CBAM) (C) The Carbon Border Adjustment Mechanism (CBAM) (D) The Carton Border Allocation Mechanism (CBAM)

37 Article 15, Regulations Governing the Establishment and Management of Customs Brokers: In case of the cargoes eligible to be released through “C1” customs clearance mode, the hard copy of the Customs Declaration and its supporting documents should be properly filed in the customs broker's records within the required “preservation period”. How long is this “preservation period”? (A) Six months (B) Twelve months (C) Eighteen months (D) Twenty-four months

38 According to the Articles 3 and 5, Regulations Governing Issuance of Certificates of Origin and Certificates of Processing, which of the followings is used to calculate the added value of products? (A)(Export price of product - Prices of directly and indirectly imported raw materials and components) ÷ Export price of product. (B)(Export price of product - Prices of directly and indirectly imported raw materials and components and labor cost) ÷ Market price of product. (C)(Export price of product and freight - Prices of directly and indirectly imported raw materials and components and freight) ÷ Export price of product. (D)(Export price of product and insurance - Prices of directly and indirectly imported raw materials and components) ÷ Market price of product.

39 Article 11 of Regulations Governing Customs Clearance Procedures for Air Express Consignments regulates that the Import express consignments shall be classified according to their natures and values. Which of the followings is correct? (A)The import low-value duty-free consignment: with a Customs value not more than 4,000 NT; The import high-value: exceeding 30,000 NT (B)The import low-value duty-free consignment: with a Customs value not more than 3,000 NT; The import high-value: exceeding 40,000 NT (C)The import low-value duty-free consignment: with a Customs value not more than 2,000 NT; The import high-value: exceeding 50,000 NT (D)The import low-value duty-free consignment: with a Customs value not more than 1,000 NT; The import high-value: exceeding 60,000 NT

1 利用電子測距儀器執行距離觀測，測得系列距離觀測量為 17.212 m、17.210 m、17.208 m、 19.210 m 及 17.210 m，下列敘述何者錯誤？ (A)觀測量一定含有偶然誤差 (B)觀測量可能含有系統誤差 (C)觀測量含有錯誤觀測量 (D)觀測量若含有系統誤差，可直接由此系列觀測量透過最小自乘法平差程序解算之

2 某平面三角形測得兩邊及夾角值與誤差分別是 100.00±0.02 m、150.00±0.02 m、60°±5"，則 其面積中誤差為何？ (A)±1.54 m2 (B)±1.56 m2 (C)±1.58 m2 (D)±1.60 m2

3 若一段距離分三次觀測與一次觀測，若每次觀測精度均相同且觀測之間均獨立不相關，則分 三次觀測加總的誤差是一次觀測誤差之幾倍？ (A) 1.7 (B)3 (C) 1.4 (D)1

4 沿水準路線上施測時，若遇到河流，水準儀器至後視、前視之距離可能相距很大，此時可採 用對向交互水準測量，簡稱對向水準測量施測之，此測量方式是為了消除那些誤差？ (A)水準尺豎立不直的誤差、以及視準軸、地球曲率與大氣折光引起之誤差 (B)水準尺上估讀的誤差、以及視準軸、地球曲率與大氣折光引起之誤差 (C)儀器與標尺沉陷的誤差、以及視準軸、地球曲率與大氣折光引起之誤差 (D)視準軸、地球曲率與大氣折光引起之誤差

5 A 點高程為 196.466 m、B 點高程為 196.945 m，水準路線線上依序有 P、Q、R 三個水準測點， AP 路線長為 0.75 km、PQ 路線長為 0.59 km、QR 路線長為 1.15 km、RB 路線長為 1.51 km，水準測量測得∆hAB = 0.460 m，若依據路線長度比例分配改正數，試求 PQ 點間的高差改正數應該為多少 mm？ (A) 3 mm (B) 5 mm (C)-3 mm (D)-5 mm

6 AB 之間無法直接進行水平距離量測，今於 P 點架設全測站儀測得∠APB 水平角度 60°10'20"、 PA 水平距離 100.000 m；再於 B 點架站測得角∠PBA 水平角度為 45°30'42"，則 AB 水平距離 為多少 m？ (A) 121.611 m (B) 121.609 m (C) 121.605 m (D) 121.603 m