阿摩線上測驗
登入
首頁
>
輪機工程(概要)(包括推進裝置、輔機與輪機英文)
>
107年 - 107-2 交通部航海人員測驗_一等管輪:輪機工程(包括推進裝置、輔機與輪機英文)#69786
> 試題詳解
6. 下列對於漩渦泵使用,下列何者錯誤?
(A) 開式葉輪一定配閉式流道
(B) 閉式葉輪要配開式流道
(C) 效率一般比離心泵低
(D) 在液體工作時葉片相對葉輪的運動軌跡是一條螺旋線
答案:
登入後查看
統計:
A(607), B(159), C(142), D(94), E(0) #1813566
詳解 (共 1 筆)
ruruu;3u;3ruru
B1 · 2025/08/12
#6601940
旋渦泵相比離心泵揚程更高,但效率較低 ...
(共 59 字,隱藏中)
前往觀看
10
0
其他試題
2. 下列何種為採用漩渦泵效率最差的方法? (A) 開式流道輔助閉式流道 (B) 普通開式流道 (C) 向心開式流道 (D) 閉式流道
#1813562
3. 燃油中的雜質去除方式,一般有分為三種,下列何者為非? (A) 離心法 (B) 篩選法 (C) 過濾法 (D) 重力沉澱法
#1813563
4. 在燃油櫃或滑油櫃的出口,當機艙火警發生時,可緊急的在滅火站遙控,利用空氣作動缸或 拉動鋼索將出口閥迅速關閉,避免災情擴大之閥稱為何種閥? (A) 調節閥 (B) 快關閥 (C) 安全閥 (D) 減壓閥
#1813564
5. Each of plates which with an elastomer seal fitted around its periphery, is contained within a frame with clamping plates at each end. What equipment is above description? (A) Plate type heat exchanger (B) Fin type heat exchanger (C) Shell-and tube type heat exchanger (D) Venting heat exchanger
#1813565
7. 鍋爐凝水系統的阻汽器應設置在下列何種管路? (A) 給水 (B) 消防 (C) 凝水 (D) 蒸氣
#1813567
8. 淨油機啟動前,要加「水封」水的目的為何? (A) 防止水從油孔排出 (B) 防止油從水孔排出 (C) 防止油從排渣孔排出 (D) 防止水從排渣孔排出
#1813568
9. 鍋爐主給水管,在給水量非常微小時,常有泵中水量不足空轉發熱之情事發生,因此在給水泵之出口處,裝設何管路?使泵得以保有適當水量而維持其正常之運轉。 (A) 疏水管路 (B) 保溫蒸汽管路 (C) 再循環管路 (D) 抽氣管路
#1813569
10. 06:00 轉車機接合轉車至06:15脫離的英文為06:00 Turning gear ________ in and put off at 06:15,其空格為下列何者? (A) engaged (B) wrapped up (C) plugged (D) hooked
#1813570
11. The ____________ for either ahead and astern direction are situated at the shaft driving end near by the turning gear of main propulsion diesel engine. (A) thrust pads (B) main bearings (C) crosshead head guide shoes (D) intermediate shaft bearings
#1813571
12. For years huge ship propulsion had astandard configulation: ____________________________________________ . (A) a stern thruster in the forward of the ship to assist (B) a bow thruster in the aft of the ship to assist (C) a propeller in the rear with a rudder behind it to steer (D) a rudder in the rear with a propeller behind it to steer
#1813572