(1) Convert the following decimal number to a number in base 13: 297

【已刪除】2. (20%) For the devices in the circuit of Fig. 2，Vtn= IV，（μnCux=50μA/V2, and W=5μm, Neglecl the channel lenglh modukuion and body eiTecl, find V2 and l1

【已刪除】3. (20%) As shown in Fig. 3; the BJT has a coniinon-eniiller current gain = 100，0.7V, and the (hermal voltage VT= kTlq = 25mV. Find the cic collect currenl and dc voltage Kc, and small-signal voltage gain Vo/Vi. [Hint: In the small signal analysis, the base current can be ignored]

【已刪除】4. 

【已刪除】5. (20%) The circuit of Fig. 5 utilizes two MOSFET's whose bias details are not shown and a 50Ω coaxial cable. Transistor Q1 operates as a CS amplifier and Q2 as a CG amplifier. For proper operation, transistor Q2 is required lo present a 50Ω resistance to the cable. That is, the inpul resislance of Q2 is 50Ω. Assume llie transistors are well biased here. Whal must gm2 be? What value of RD is required to provide 1V pulses at I he drain of Q2?

【已刪除】(2) Give the Boolean expression for the following circuit diagram.

(3) If a processor is a 16-bit machine, how many different memory locations can it distinguish?

(4) What color does an RGB value of (0,0,0) represent?

(5) What is an assignment statement in a computer program?

(6) A stack is a LIFO structure. What does LIFO stand for?

【已刪除】(7) How many comparisons does it take using a binary search to find the value 8 or determine that the value is not in the list?