阿摩線上測驗
登入
首頁
>
輔機
>
96年 - 96 關務升官等考試_薦任_輪機工程:輔機#50345
> 申論題
三、泵可分為那四類?請分別敘述其工作原理。(20 分)
相關申論題
一、“汽鼓(steam drum)”可在何種蒸汽產生系統中出現?其功能為何?請繪出其簡圖 並說明之。(20 分)
#178401
二、熱交換器之殼體與熱傳管會因工作溫度不同而有不同之熱膨脹,因此會產生巨大之 熱應力進而導致熱交換器破損洩漏。請列出四種吸收熱膨脹之熱傳管設計以克服本 問題之發生。(20 分)
#178402
四、過熱器依照其加熱方式可區分為那兩種?請分別敘述其優缺點。(20 分)
#178404
五、何謂管子之標稱管徑(nominal size)?請敘述之。(20 分)
#178405
五、請將下列英文翻譯成中文。 (20 分)The Port State Control Officer (PSCO) ensures compliance with Annex I of MARPOL 73/78 by assessing oil residues, sludge and bilge water holding tanks, and the efficiency of the oily water separator. The PSCO reviews the Oil Record Book to verify proper disposal and usage of reception facilities, noting any inadequacies. Ships must maintain improved sludge systems to store and dispose of oil residues in line with international standards. The PSCO checks the effectiveness of onboard oil filtering systems and related equipment for compliance. The inspection now includes automated monitoring systems to track oil discharges and sludge processing in real time. By enforcing these regulations, authorities aim to protect marine ecosystems and promote sustainable maritime operations.
#547631
四、以主機缸套冷卻水作為加熱海水淡化裝置的工作流體,請詳述在啟動和停用時,主機工作系統應特別注意那些問題?(20 分)
#547630
三、請詳述造成空氣壓縮機(Air Compressor)的出口排氣溫度過高的原因為 何?(20 分)
#547629
二、船用泵(Pump)是屬於流體機械(Fluid Machinery)的一種,其中離心泵 (Centrifugal Pump)廣泛使用於輪船機艙中,請以流量(Flow Rate)與揚程(Head)試述離心泵的結構種類和適用的工作場域。(20 分)
#547628
一、伯努利方程式(Bernoulli’s Equation, BE)與雷諾數(Reynolds Number, Re) 為兩個應用流體力學的重要內容,請分別詳述 Re 所代表的物理意義和 BE 的基本原理並分析討論其流體流動時兩者之間的關聯性。 (20 分)
#547627
五、請將下列專業英文翻譯成中文。(20 分)Controllable pitch propellers are normally fitted to a flanged tail shaft as the operating mechanism is housed in the propeller boss. As its name implies, it is possible to alter the pitch of this type of propeller to change ship speed or to adjust to the prevailing resistance conditions. This change in pitch is effected by rotating the blades about their vertical axes, either by hydraulic or mechanical means. A shaft generator can be driven at constant speed while allowing at the same time a change of ship’s speed through the propeller. Since it is normally possible to reverse the pitch completely, this type of propeller is used with a unidirectional engine to give full ahead or astern thrust, when maneuvering.
#516134
相關試卷
114年 - 114 高等考試_三級_輪機技術:輔機#128457
114年 · #128457
113年 - 113 高等考試_三級_輪機技術:輔機#121244
113年 · #121244
112年 - 112 高等考試_三級_輪機技術:輔機#115460
112年 · #115460
111年 - 111 高等考試_三級_輪機技術:輔機#109231
111年 · #109231
110年 - 110 高等考試_三級_輪機技術:輔機#102703
110年 · #102703
109年 - 109 高等考試_三級_輪機技術:輔機#88842
109年 · #88842
109年 - 109 關務特種考試_三等_輪機工程:輔機#86474
109年 · #86474
108年 - 108 高等考試_三級_輪機技術:輔機#77721
108年 · #77721
107年 - 107 高等考試_三級_輪機技術:輔機#70737
107年 · #70737
106年 - 106 高等考試_三級_輪機技術:輔機#63125
106年 · #63125