阿摩:今日的準備,明日的成就
100
(3 分35 秒)
模式:循序漸進模式
【特定試卷】113 年 - 113-3 航海人員測驗_一等管輪:輪機工程(包括推進裝置、輔機與輪機英文)#122493113 年 - 113-2 航海人員測驗【302】一等管輪【000009】:輪機工..(76~100)
繼續測驗
再次測驗 下載 下載收錄
1(D).

1. 下列何者不是推進軸產生龜裂之成因?
(A) 擦傷
(B) 材料疲勞
(C) 電化腐蝕
(D) 震動


2(B).

5. Certain watch keeping duties are necessary for the continuous operation of equipment or plan such as the ________.
(A) purifying oil
(B) transferring oil
(C) supplying fuel from rank to engine
(D) heating heavy oil


3(A).

29. 冷凍壓縮機能量調節機構在何時卸載?
(A) 吸氣壓力過低
(B) 排氣溫度過高
(C) 電機電流過大
(D) 排氣壓力過高


4(B).

29. The products of combustion of marine fuels include sulfur dioxide, which, when combined with water vapor, forms acids such as the sulfurous acid and sulfuric acid. These acids cause cold-end corrosion if allowed to condense on boiler components of flue-gas ducting. Therefore, in order to prevent the cold-end corrosion, which action is not to be taken?
(A) To ensure the temperature of exhaust gas is always above the condensation temperature level.
(B) To install more heat exchangers in the flue-gas ducting so that the temperature of exhaust gas is further reduced.
(C) To prevent any chemical process that formulates the acid within the boiler components of fluegas ducting.
(D) To ensure there is no water-vapor condensate formed within the flue gas by controlling the flow temperatures in the flue-gas ducting.


5(C).

35. 下列何者不屬於軸馬力計的型式之一?
(A) 光學式
(B) 張線振動式
(C) 離心式
(D) 相位差式


6(B).

1. 有關冷凍系統中冷媒的選擇條件,下列何者係錯誤?
(A) 臨界溫度要高
(B) 比容要大
(C) 傳熱率要高
(D) 潛熱要大


7(B).

2. 冷凍系統中的供液電磁閥,下列敘述何種錯誤?
(A) 是一種開閉由電磁力控制的閥
(B) 裝在熱力膨脹閥後的液管上
(C) 當庫溫升到上限時,溫度繼電器接通電磁閥電路,使閥開啟
(D) 當庫溫降到下限時,溫度繼電器斷開電磁閥電路,使閥關閉


8(B).

3. 船上一般用焊接成的鋼管,適用於介質工作溫度和壓力均較低的管路,如燃油、滑油、淡水、海水等工作介質所使用的管路,此種管路稱為何種管路?
(A) 無縫鋼管
(B) 有縫鋼管
(C) 鐵管
(D) 銅管


9(C).

4. The distance travelled between TDC and BDC is the ____.
(A) tallness
(B) scope
(C) stroke
(D) expanse


10(D).

5. 船舶推進系統,若採用間接傳動的方式,其最大優點為何?
(A) 傳動效率高
(B) 維護管理方便
(C) 電力耗電量小
(D) 船舶操縱性能高


11(D).

6. 推進器之螺距比是指下列何者?
(A) 螺距與轂外徑
(B) 轂外徑與螺槳直徑
(C) 螺槳直徑與軸系長度
(D) 螺距與推進器直徑


12(C).

7. 通常只裝在主機的滑油管路系統上,在普通的粗、細濾器內以吸附金屬粉粒,避免進入系統 ,增加磨耗之濾器為何?
(A) 自動沖洗式濾器
(B) 旁通濾器
(C) 磁性濾清器
(D) 精細濾器


13(B).

8. 依據下圖,請問清淨後的油是從何處排出?

(A) A
(B) B
(C) C
(D) D



14(A).

9. 針對推進器功率與柴油機轉速之關係,下列何者正確?
(A) 3次方函數
(B) 2次方函數
(C) 1次方函數
(D) 無關係


15(D).

10. 針對改良型之空氣密封及油封混和式軸封裝置之說明,下列何者錯誤?
(A) 操作簡單
(B) 構造簡單
(C) 高度可靠性
(D) 屬積極處理油洩漏型


16(A).

11. 船在水中航行時,在水面下的船舶構造,因水的黏滯性而造成的的阻力,稱為何種阻力?
(A) 黏性阻力
(B) 空氣阻力
(C) 興波阻力
(D) 靜阻力


17(B).

12. 推進器之葉片數之設計與下列何者無關?
(A) 馬力
(B) 船舵長度
(C) 船速
(D) 吃水深度


18(B).

13. 輔鍋爐中的蒸汽阻流板結構下列何者說明正確?
(A) 旋轉形狀鋼板組成
(B) 具有小孔鋼板組成
(C) 直立形狀鋼板組成
(D) 波浪形狀鋼板組成


19(C).

14. 雙螺桿螺旋泵的兩組螺旋如何搭配?
(A) 均為正螺旋
(B) 均為反螺旋
(C) 螺旋一正一反
(D) 相同螺旋或一正一反均可


20(D).

15. 下列何種熱交換器最常用於冷卻渦輪增壓機之高溫空氣?
(A) 板式
(B) 殼式
(C) 盤管式
(D) 鰭片式


21(C).

16. 離心式泵串聯使用時有何作用?
(A) 降低轉軸消耗量
(B) 增加流量
(C) 增加總揚程
(D) 加長使用年限


22(A).

17. 下列何者不是對冷媒的要求條件?
(A) 蒸發溫度要高
(B) 冷凝壓力要低
(C) 毒性小
(D) 臨界溫度要高


23(D).

18. 在冷凍系統蒸發器與壓縮機間之冷媒狀態為何?
(A) 高壓液態
(B) 低壓低溫液態
(C) 高溫高壓汽態
(D) 低壓低溫汽態


24(D).

19. 蒸汽壓縮式冷凍系統之基本四大元件為何?
(A) 壓縮機、冷凝器、乾燥器與蒸發器
(B) 壓縮機、冷凝器、膨脹閥與過冷器
(C) 壓縮機、冷凝器、蒸發器與油分離器
(D) 壓縮機、冷凝器、膨脹閥與蒸發器


25(B).

20. For the _____ type blower, the incoming air flows into the eye of impeller.
(A) ejector
(B) centrifugal
(C) reciprocating
(D) rotary


快捷工具

【特定試卷】113 年 - 113-3 航海人員測驗_一等管輪:輪機工程(包括推進裝置、輔機與輪機英文)#122493113 年 - 113-2 航海人員測驗【302】一等管輪【000009】:輪機工..(76~100)-阿摩線上測驗

李政哲剛剛做了阿摩測驗,考了100分