阿摩:人只要堅持,一定得到別人的支持。
78
(1 分45 秒)
模式:精熟測驗
科目:輪機工程(概要)(包括推進裝置、輔機與輪機英文)
繼續測驗
再次測驗 下載 下載收錄
1(C).

14. What kind of machinery is not to convert mechanical energy into working fluids?
(A) pump
(B) compressor
(C) boiler
(D) blower


2(B).

26. 二段效用板式熱交換器造水機中,以主機缸套水或噴射系統之蒸汽加熱給水之部分,其名 稱為下列何者?
(A) 分離室
(B) 蒸發部
(C) 凝結部
(D) 空氣抽射器


3(A).

37. Which system shall the safety and environmental protection policy be stated in?
(A) Safety management system
(B) Emergency safety system
(C) Port state control system
(D) Training, certification and watch keeping system


4(C).

40. For the diesel engine, the discharge of the injection pump is led directly to the _______, which comprises a spring-loaded fuel valve mounted on the fuel nozzle.
(A) fuel rack
(B) plunger
(C) fuel injector
(D) spill port


5(D).

34. 下列何者不是船用鍋爐給水系統之常用型式?
(A) 開放式
(B) 壓力封閉式
(C) 半閉式
(D) 噴射開放式


6(D).
X


13. 為了避免含油污水的乳化現象,提高分離性能,一般選用何種泵作為含油污水的輸送泵?
(A) 往復式泵
(B) 離心式泵
(C) 齒輪式泵
(D) 噴射式泵


7(A).

33. Which code has the objectives to ensure safety at sea, prevention of human injury or loss of life, and avoidance of damage to the environment?
(A) International Safety Management Code
(B) STCW Training Code
(C) Port State Control Officer Code
(D) MARPOL Code


8(C).

26. The main function of the intercooler of a multistage air compressor is what?
(A) to increase the temperature of working fluids
(B) to reduce the pressure of working fluids
(C) to reduce the pumping power input for a given flow rater
(D) to increase the pumping speed for a given flow rater


9(D).

10. 下列何者適用於描述檢修引擎之準備工作?
(A) Keep the engine ready for being started up
(B) Check if no one is around the engine
(C) Check the holding capacities of fuel oil, air, etc.
(D) Prepare engine jigs and tool ready to use


10(C).

34. 冷凍裝置的熱氣除霜是利用下列何者來除霜?
(A) 低壓水蒸汽
(B) 熱空氣
(C) 壓縮機排出的冷媒蒸汽
(D) 冷凍壓縮機吸口過熱氣


11(C).
X


15. 下列何種泵可建立較高的壓力揚程?
(A) 離心式泵
(B) 往復式泵
(C) 噴射式泵
(D) 渦卷式泵


12(A).

31. In addition to the waste heat in the exhaust gases, there is residual energy stored in the _____ of a diesel engine.
(A) cooling system
(B) turning system
(C) pumping system
(D) lubricating system


13(A).

19. _______ are necessary for the continuous operation of equipment or plant such as the transferring of fuel.
(A) Certain watch keeping duties
(B) Remote control of values
(C) Emergency dropping
(D) Uncertain walking around desk


14(B).
X


5. Only chief engineer is responsible for maintaining ______.
(A) Seal Log
(B) Oil Record Book
(C) Chief Engineer Night Order Book
(D) Engine Room Log Book


快捷工具

精熟測驗 - 輪機工程(概要)(包括推進裝置、輔機與輪機英文)-阿摩線上測驗

李政哲剛剛做了阿摩測驗,考了78分