214.Motorcycle braking methods should be adjusted according to externalconditions. On slippery or uphill roads, which braking method isrecommended?
(A) Front brake as primary, rear brake as secondary
(B) Rearbrake as primary, front brake as secondary
(C) Even distribution between frontand rear brakes.

215.When replacing a motorcycle battery, first turn the main switch key to the"OFF" position, then remove the battery. What is the correct sequence? (A)Remove the negative cable first, then the positive cable (B) Remove thepositive cable first, then the negative cable (C) Either sequence is acceptable.

216. If the air filter accumulates dust, it causes: (A) reduced horsepower (B)increased fuel consumption (C) both of the above.

217. (A) Vehicle width restriction (B) No parking (C) Vehicle height restriction.

218. (A) Vehicle length restriction (B) Vehicle width restriction (C) No entry for cars.

219. (A) Stop and then proceed (B) Stop for inspection (C) No pedestrian crossing.

220. (A) Stop and then proceed (B) Stop for inspection (C) No passage.

221.When riding a motorcycle, besides checking for fuel, which of the followingstatements is correct? (A) No additional basic maintenance is needed. (B)Basic maintenance is required to ensure the vehicle's condition. (C) Only thetire tread depth needs to be checked.

222.If a motorcycle produces abnormal noises when braking, which of thefollowing statements regarding handling is correct? (A) If the noise occurs onlyin wet weather and the brakes function normally, it is considered normal andrequires no special action. (B) The motorcycle should be taken as soon aspossible to a certified shop for a professional technician to inspect the brakesystem, identify the cause of the abnormality, and perform necessary repairs.(C) You can check the brake pad thickness yourself, and if it has not worndown to the warning line, there is no safety concern.

223.Before riding a motorcycle, a safety inspection should be conducted.Regarding the inspection items, which of the following statements is correct?(A) Mainly check the brakes and tires; as long as the braking system isnormal, it is safe to ride. (B) Since the motorcycle passed safety inspectionbefore leaving the factory, only periodic maintenance requires a full check. (C)Check the lights, turn signals, brakes, tires, horn, and rearview mirrors,ensuring all systems function properly.

224.Regarding safety helmet precautions, which of the following statements isincorrect? (A) A helmet that has been subjected to impact can still be usednormally if the exterior shows no damage, without replacement. (B) The chinstrap length should not be too long or too short, leaving about one finger'swidth of space. (C) The buckle should be under the chin, leaving one finger'sspace, and the knob should be tightened.

115年 - 機車駕照筆試_英文 751-806（2026/01 更新）#144939

115年 - 機車駕照筆試_英文 701-750（2026/01 更新）#144938

115年 - 機車駕照筆試_英文 651-700（2026/01 更新）#144937

115年 - 機車駕照筆試_英文 601-650（2026/01 更新）#144936

115年 - 機車駕照筆試_英文 551-600（2026/01 更新）#144935

115年 - 機車駕照筆試_英文 501-550（2026/01 更新）#144934

115年 - 機車駕照筆試_英文 451-500（2026/01 更新）#144933

115年 - 機車駕照筆試_英文 401-450（2026/01 更新）#144932

115年 - 機車駕照筆試_英文 351-400（2026/01 更新）#144931

115年 - 機車駕照筆試_英文 301-350（2026/01 更新）#144930