(b) the exit velocity (10%), and

(a) isothermal compression (10%) and

(b) isentropic compression (15%).

(a) the mass fow rate of the steam (10%),

(c) the flow work per unit mass (5%). At 150 kPa, we know that the specific volume for saturated liquid water and saturated water vapor are vf= 0.001053 m3/kg and vg= 1.1594 m3/kg, respectively. The internal energy for saturated liquid water and saturated water vapor are uf= 466.97 kJikg and ug= 2519.2 kJfkg, respectively. The enthalpy for saturated liquid water and saturated water vapor are hf = 467.13 kJkg and hg = 2693.1 k.I/kg, respectively.

(a)The most effective (also idealized) engine is operated under a Carnot cycle, which consists four processes: (1) Heat addition to the medium at a temperature, TH, (2) Isentropic expansion of the medium to a lower temperature, TL; (3) Heat rejection from the medium at temperature TL; and (4) Isentropic compression of the medium back to temperature TH. Plot the T-s (termperature-entropy) diagram and p-v (pressure-volume) diagram of the process, and derive the thermal efficiency. Discuss the assumptions made in the model. (15%)

(b) For the four-stroke spark-ignition cngines employed in cars as shown in the figure below, Otto cycle is a more realistic model, with the heat addition and rejection processes at constant temperature in the Carnot cycie replaced by processes at constant volume Cheat addition at yolume TDC and heat rejection at volume BDC). Plot the T-s diagram and p-y diagram of the process for the "simplified (simpler than that shown below)" Otto cycle, and derive the thermal eficiency. Discuss the assumptions made in the Otto cycle, and the differences in efficiencies between the Carnot and Otto cycles. (15%)

(a) Derive the so-called Maxwell relations: (10%)

(b) Show that for an isentropic process of an ideal gas reiating state 1 and state 2, where x is the specific heat ratio. (10%)

(4) The solid M at 1350 K is dissolved in the liquid N at 1350 K, forming the M-N mixing liquid solution. Calculate the total entropy change and the total enthalpy change in the whole process. (10%)

(3) What is the total enthalpy change of M-N mixing liquid solution at 1350 K? (5%)

110年 - 110 國立臺灣科技大學_碩士班招生試題_材料科學與工程系(丙組)：熱力學#113287

110年 - 110 國立清華大學碩士班考試入學試題_工程與系統科學系/乙組:熱力學#105638

110年 - 110 國立臺北科技大學_碩士班招生考試_能源與冷凍空調工程系(乙組)：熱力學#105572

110年 - 110 高雄科技大學_碩士班招生考試_化學工程與材料工程系：熱力學(丙組)#104400

110年 - 110 國立中央大學_碩士班招生考試_機械工程學系/熱流組(一般生):熱力學#103851

110年 - 110 國立臺北科技大學_碩士班招生考試_車輛工程系：熱力學#101959

110年 - 110 國立臺灣大學_碩士班招生考試_應用力學研究所乙組:熱力學(C)#101258

110年 - 110 國立臺灣大學_碩士班招生考試_材料科學與工程研究所乙組:熱力學(B)#100917

110年 - 110 國立臺灣大學_碩士班招生考試_生物機電工程學研究所乙、戊組: 熱力學(D)#100913

110年 - 110 國立臺灣大學_碩士班招生考試_部分系所:熱力學(A)(包括熱傳學)#100699