阿摩線上測驗 登入

最新科目

最新試卷

115年 - 18301 車床-CNC 車床 乙級 工作項目 01:工件度量 1-50(2026/01/05 更新)#136142(50題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 06:傳統銑床、CNC銑床-故障排除及機具維護 51-76(2026/01/05 更新)#136141(26題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 06:傳統銑床、CNC銑床-故障排除及機具維護 1-50(2026/01/05 更新)#136140(50題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 05:傳統銑床、CNC銑床-二又二分之一次圓弧及輪廓 51-85(2026/01/05 更新)#136139(35題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 05:傳統銑床、CNC銑床-二又二分之一次圓弧及輪廓 1-50(2026/01/05 更新)#136138(50題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 04:銑削條件之判斷及處理及傳統銑床、CNC銑床-銑削實習 201-247(2026/01/05 更新)#136137(47題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 04:銑削條件之判斷及處理及傳統銑床、CNC銑床-銑削實習 151-200(2026/01/05 更新)#136136(50題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 04:銑削條件之判斷及處理及傳統銑床、CNC銑床-銑削實習 101-150(2026/01/05 更新)#136135(50題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 04:銑削條件之判斷及處理及傳統銑床、CNC銑床-銑削實習 51-100(2026/01/05 更新)#136134(50題)

115年 - 18201 銑床-CNC 銑床 乙級 工作項目 04:銑削條件之判斷及處理及傳統銑床、CNC銑床-銑削實習 1-50(2026/01/05 更新)#136133(50題)

最新試題

41. Which of the following statements concerning extraction is INCORRECT? (A) The recovery of the extraction is defined as the ratio of the instrument signal after extraction to the signal before extraction. (B) Extraction can effectively alleviate matrix effects. (C) Methanol is added in supercritical fluid extraction (SFE) to facilitate the extraction of polar compounds such as ibuprofen. (D) The suitable stationary phase of a solid-phase extraction cartridge for extracting tertiary amine drugs (e.g., lidocaine) is a strong cation-exchange sorbent. (E) Lowering the pH of the solution enhances the extraction of propionic acid (pKa = 4.0).

40. Which of the following statements concerning optical components is INCORRECT? (A) Lenses made of quartz are suitable for ultraviolet (UV) spectroscopy (B) The resolution of a monochromator increases with narrower slits, higher grating groove density, longer focal length, and higher diffraction order. (C) Laser operation does not require population inversion. (D) An interference filter selectively transmits a narrow wavelength band using thin-film interference. (E) Microelectrodes exhibit reduced charging currents compared with conventional electrodes.

39. Which of the following statements concerning microelectrode is INCORRECT? (A) Microelectrodes can provide high sensitivity because they have a large double-layer capacitance at the electrode-solution interface. (B) Microelectrodes have at least one dimension in the micrometer range, resulting in enhanced mass transport by radial diffusion. (C) Microelectrodes are well suited for fast cyclic voltammetry. (D) Microelectrodes allow electrochemical measurements in solutions with high resistance and minimal supporting electrolyte. (E) Microelectrodes exhibit reduced charging currents compared with conventional electrodes.

最新申論題

最新課程

最新主題筆記

最新討論